|
|
Mold Testing CT Connecticut
Mold Testing NY
 
IAC2 and ProLab Certified Mold Testing in CT and NY
Air Sampling, Direct Sampling, Mold Inspections
Allied Home Inspections can usually provide same-day specimen collection and testing for mold in your house or condo. Please note that even if you suspect that mold is in your home testing may not be needed in all circumstances - in many cases if visible mold growth is present sampling is unnecessary. Call us at 203-748-0400 or 914-438-4249 for a consulatation. Click here to see more about our Healthy Home Exam and mold testing in CT and NY.
Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Some molds have the potential to cause health problems and can produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common. They can be immediate or delayed.
Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold-allergic and non-allergic people. Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold. Research on mold and health effects is ongoing.
Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
Moisture control is the key to mold control, so when water leaks or spills occur indoors - ACT QUICKLY. If wet or damp materials or areas are dried 24-48 hours after a leak or spill happens, in most cases mold will not grow.
- Clean and repair roof gutters regularly.
- Make sure the ground slopes away from the building foundation, so that water does not enter or collect around the foundation.
 Keep air conditioning drip pans clean and the drain lines unobstructed and flowing properly.
- Keep indoor humidity low. If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 percent) relative humidity. Relative humidity can be measured with a moisture or humidity meter, a small, inexpensive ($10-$50) instrument available at many hardware stores.
- If you see condensation or moisture collecting on windows, walls or pipes ACT QUICKLY to dry the wet surface and reduce the moisture/water source. Condensation can be a sign of high humidity.
Actions that will help to reduce humidity:
- Vent appliances that produce moisture, such as clothes dryers, stoves, and kerosene heaters to the outside where possible. (Combustion appliances such as stoves and kerosene heaters produce water vapor and will increase the humidity unless vented to the outside.)
- Use air conditioners and/or dehumidifiers when needed.
- Run the bathroom fan or open the window when showering. Use exhaust fans or open windows whenever cooking, running the dishwasher or dishwashing, etc.
Actions that will help prevent condensation:
- Reduce the humidity (see above).
- Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed.
- Cover cold surfaces, such as cold water pipes, with insulation.
- Increase air temperature.
If you have concerns we can inspect and test your home for mold. Allied Home Inspections is IAC2 certified for mold testing. We use indoor air quality (IAQ) sampling equipment with analysis provided by a laboratory approved by the American Industrial Hygiene Association (AIHA). Please call me at 203-748-0400 for a consultation and pricing information, or send an email to Tom@Allied123.com.
Stamford Norwalk Greenwich Darien New Canaan Westport Fairfield Bridgeport Cheshire Stratford Shelton Trumbull Easton Weston Wilton Ridgefield Redding Monroe Bethel Newtown Danbury Brookfield Southbury Milford Sherman New Fairfield Middlebury Woodbury Roxbury Hamden
Washington North Haven New Milford Orange Seymour Wallingford
Woodbridge
Port Chester Rye Brook Elmsford Bedford Larchmont Ossining Pelham Somers Ardsley Tarrytown Mt. Kisco Pleasantville Greenburgh Eastchester Pound Ridge Sleepy Hollow New Rochelle White Plains Mamaroneck Rye Harrison
North Salem South Salem
|
|
